Адаптер корпуса накопителя GLOTRENDS 3 в 1 M.2

3 in 1 SSD Enclosure

• M.2 PCIE NVME to USB-C: support M.2 NVME SSD (Key-M), 2280/2260/2242/2230 size
• M.2 SATA to USB-C: support M.2 SATA SSD (Key B/B+M), 2280/2260/2242/2230 size
• 2.5 inch SATA SSD to USB-C: support 7mm/9.5mm thickness 2.5 inch SATA SSD
• USB-C to C cable (10Gbps) and USB-C to A cable (10Gbps) included

3 in 1 SSD Enclosure

M.2 PCIE NVME to USB-C: support M.2 NVME SSD (Key-M) as bellow:

• Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO and other M.2 SSDs with PCI-E (M-KEY) Interface Type.
• Support Intel Optane SSD 800P SeriesS
• Support Intel SSD 760p SeriesS
• Support Intel SSD 660p SeriesS
• Support Intel SSD 600p Series

M.2 SATA to USB-C: support M.2 SATA SSD (Key B/B+M) as bellow:

• Samsung 860 EVO/850 EVO/Crucial MX500/Crucial MX300/WD Blue 3D NAND, etc.

2.5 inch SATA SSD to USB-C: support 7mm/9.5mm thickness 2.5 inch SATA SSD

3 Separate PCB Board Design

• Long-term use of electronic equipment will inevitably lead to failure. In our product, there are 3 kinds of separate PCB board, any one failure will not affect the other two.
• To save your cost, you only need to replace the faulty PCB board, and keep other two PCB board.
• This product not only supports 3 kinds of SSDs, but also provides a low-cost spare parts replacement solution.
• This is the most cost-effective and practical SSD enclosure solution, and maybe it will accompany you forever.

M.2 SSD Installation

• Secure M.2 NVME SSD with screw;
• Secure M.2 SATA SSD with screw.

Note: Do not include M.2 SSD.

2.5 inch SSD Instalation

• Anti-vibration kits are included, especial for 7mm thickness SSD；
• Install as picture shown.

Note: Do not include 2.5 inch SSD.

Thermal Silica Installation

• Remove the protective film of 10 small square silica gel pad
• Put the small square silica gel pad on the surface of SSD chip/flash