Ледокол 1.0e решетка fpga Ice40up5k разработка

Icebreaker 1.0e fpga lattice ice40up5k development board risc-v open source core board supports nextpnr yosys

The product is shipped based on the color or size of the main image of the product page.

       ICEBreaker 1.0E FPGA Lattice ICE40UP5K Development Board RISC-V Open Source Core Board Supports Nextpnr Yosys  

              Two internal oscillators (10 kHz and 48 MHz) for simple designs.Eight DSP multiplier blocks for signal processing such as audio synthesis and even software defined radio     

Low power consumption perfect for battery-powered applications.Three 24 mA drive and 3 x hard IP PWM (can drive RGB LEDs and small motors)     

Plentiful, fast storage     

128 Mbit (16 MB) quad SPI double data rate (QSPI-DDR) flash.Example: can stream video to LED matrix     

Lots of I/O     

Features & Specifications     

Lattice iCE40UP5k FPGA     

5280 logic cells (4-LUT + Carry + FF)     

120 Kbit dual-port block RAM     

1 Mbit (128 KByte) single-port RAM     

PLL, 2 x SPI, 2 x I2C hard IPs     

Three pins (header) for RGB LED     

Two on-board LEDs     

One UART, RX pin and TX pin accessible via virtual (USB) serial port     

One pushbutton     

Two available Pmod connectors (16 x pins total)     

One breakaway Pmod (8 x pins)     

Pre-wired, breakaway Pmod module     

Input and output user accessible and usable in your own hardware design     

Five LEDs in a star pattern     

Three push buttons     

Capable enough to host CPU softcores     

picorv32     

picosoc     

RISC-V and others     

On-board FPGA programmer and USB-to-serial adapter     

Compatible with IceStorm iceprog tool     

Easy, driverless connection as a serial device to host computer     

USB high speed     

On-board FT2232 USB chip     

Up to 480 Mbit/s interface to host computer     

Pmod Connectors & Breakaway Pmod     

The iCEBreaker FPGA board has three standard Pmod connectors, which makes for a wide range of expansion options since Pmod is a standard followed by several hardware manufacturers. This gives you access to a massive library of modules - no matter what your project, you're sure to find a Pmod for it.     

colour:blue     

Material:PCB     

size:8*4cm     

Package Contents:     

1 x Digital Development Board     

Only the above package content, other products are not included.     

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.